Snow Leopard 10.6.2 update is OUT!!!
Moderator: SilverZero
Forum rules
The S netbook is NOT an Apple product and was never intended to run Mac OSX. Fortunately, enthusiasts have found ways to make OSX run on our netbook. However, the process may not be smooth for some. Make sure you have patience and time to get it to run. Most importantly, motivation to read and learn. This forum contains enough information to get OSX running. Most problems you may encounter can be solved just by reading through the forums or searching. So please take the time and read through the forums!
The S netbook is NOT an Apple product and was never intended to run Mac OSX. Fortunately, enthusiasts have found ways to make OSX run on our netbook. However, the process may not be smooth for some. Make sure you have patience and time to get it to run. Most importantly, motivation to read and learn. This forum contains enough information to get OSX running. Most problems you may encounter can be solved just by reading through the forums or searching. So please take the time and read through the forums!
27 posts
• Page 3 of 3 • 1, 2, 3
Re: Snow Leopard 10.6.2 update is OUT!!!
by vaniii » Thu Nov 12, 2009 4:00 pm
Enabler 1.1.4 adds support for 10.6.2.
- vaniii
- Master
- Posts: 476
- Joined: Tue Sep 08, 2009 10:46 am
Advertisement
Re: Snow Leopard 10.6.2 update is OUT!!!
by robmac21 » Thu Nov 12, 2009 8:47 pm
Getting a install failed when attempting to put snow leopard enabler 1.1.4 onto the USB drive. Works OK with 1.1.3?
-
robmac21 - New User
- Posts: 4
- Joined: Tue Feb 03, 2009 2:02 pm
- Color and Model: Black Hackintosh S10
- OS(s) installed: OS X 10.5.6
Re: Snow Leopard 10.6.2 update is OUT!!!
by vaniii » Fri Nov 13, 2009 3:29 am
robmac21 wrote:Getting a install failed when attempting to put snow leopard enabler 1.1.4 onto the USB drive. Works OK with 1.1.3?
Whenever you get a "install failed", open the log window, let it show all messages, and see where it errors out. Thanks!
Edit: Hopefully fixed in 1.1.5
Last edited by vaniii on Fri Nov 13, 2009 8:29 am, edited 1 time in total.
- vaniii
- Master
- Posts: 476
- Joined: Tue Sep 08, 2009 10:46 am
Re: Snow Leopard 10.6.2 update is OUT!!!
by StV » Fri Nov 13, 2009 4:10 am
i used enabler and after of couple rebootsit halts to systemShutdown false ... 
- StV
- Beginner
- Posts: 12
- Joined: Sat Sep 19, 2009 5:07 am
- Color and Model: Lenovo S10e
- OS(s) installed: Leopard Snow 10.6.2
Re: Snow Leopard 10.6.2 update is OUT!!!
by vaniii » Fri Nov 13, 2009 8:28 am
Maybe you should boot in safe mode (boot, press F8 immediately after the Lenovo logo, press the arrow-down key until you get "Safe mode", press enter).
- vaniii
- Master
- Posts: 476
- Joined: Tue Sep 08, 2009 10:46 am
Re: Snow Leopard 10.6.2 update is OUT!!!
by StV » Fri Nov 13, 2009 7:46 pm
i reinstalled snow then i patched it again...no problem so far, only one crush...still get unknown processor...dont know if its stable yet...
- StV
- Beginner
- Posts: 12
- Joined: Sat Sep 19, 2009 5:07 am
- Color and Model: Lenovo S10e
- OS(s) installed: Leopard Snow 10.6.2
Patched kernel seems to break VoodooHDA sound driver?
by gm7wed » Tue Nov 17, 2009 12:52 pm
zombolo wrote:If you used Vanii's Enabler to install osx, here is the guide to install 10.6.2 on s10/s10e (kernel included):
4) download patched kernel from here: http://www.mediafire.com/download.php?o2w0yunezzy
When I updated to 10.6.2 everything worked fine except I could only boot the Macintosh partition directly - Chameleon 2.0 RC 3 seemed to be broken, when booting using a separate /Volumes/Boot partition on my S10 hard disk.
Swapping the patched kernel quoted above with the 10.6.2 kernel fixes the multi-boot issue with Chameleon but disables any sound capability (can't select it in System Prefs -> Sound and the speaker icon in the Apple Menu bar is greyed out).
I've tried using versions of VoodooHDA from everywhere I can think, including from inside vaniii's S10 Enabler 1.1.8, the VoodooHDA forum, the 'New audio driver with WORKING MIC' forum topic here (viewtopic.php?f=15&t=3249), and other versions I had collected over time. None of these re-enable the sound. I've reinstalled SL and re-updated to 10.6.2, always using the S10 Enabler 1.1.8 which works perfectly in every other respect.
Any ideas? Have I a broken driver or a broken methodology? This has been a busy but unfruitful couple of days puzzling this one over
Ross
- gm7wed
- New User
- Posts: 1
- Joined: Mon May 18, 2009 7:28 am
- Location: Scotland, UK
- Color and Model: White Lenovo S10e 4068-4KG
- OS(s) installed: Win XP Home and OS X 10.6 using vaniii S10 Enabler
27 posts
• Page 3 of 3 • 1, 2, 3
Who is online
Users browsing this forum: Google Adsense [Bot] and 3 guests